Vinyl Pool Repair Kit - 4oz.
Contains : 4 oz can of #100 vinyl adhesive, dauber-applicator
and 500 sq. in. of patching vinyl.
Our Deluxe Kit
features an ample supply of liquid adhesive in a can with screw top and attached dauber-applicator, plus plenty of patching
- All surfaces must be clean. Cut round corners
on patch. For inflatables and light gauge vinyls, apply adhesive to patch sparingly and press tightly to surface to be repaired.
Allow to dry for 24 hours. A face mask or underwater goggles should always be used when going underwater to make repairs.
For deep underwater repairs, cut round corners on patch. Apply adhesive to patch and fold patch over upon itself. When you
reach the damaged area under water unfold patch and apply immediately to liner, squeezing out all water bubbles. Do not disturb
patch for at least 48 hours. Allow 4-7 days for full cure.
quick and easy vinyl repairs without liquid adhesive, use Boxer Vinyl Plastic Pool Patches. This is a clear tape where you
peel off the paper backing and apply immediately. Vinyl Plastic Pool Patches are excellent for other applications such as
vinyl upholstery and waterbeds.